Sunway Products Limited
Sunway Products Limited Honesty, Respect Profession, Innovation, Value
Add to Cart
White Color Truck Tool Box Light With Automatic On / Off Function For Luggage Box , Car Trunk Cargo Area
Features of Sunway SW-3199 Truck Tool Box Light:
1. Low power consumption, long service life up to 30,000 hours
2. AA*3 square battery box + built-in control circuit + exterior LED strip, 3M velcro at the bottom of square box for easy installation.
3. With Horizontal sensor and Vertical sensor: the lights turns on and off automatically, reaction time is 2-3 seconds.
4. 3pcs AA batteries, voltage 4.5V, standby life reaches up to more than 2 months, more than 16 hours continuous lighting services.
5. Rear velcro for box attachment.
6. 10pcs SMD2835 LEDs per strip, perfect for lighting up the entire trunk.
7. Double-sided tape included for easy installation, just peel and stick onto any flat surface.
Applications of Sunway Truck Tool Box Light:
The Truck Tool Box Light is perfect for luggage box lighting, car trunk cargo area or interior lighting.
Technical of Sunway Truck Tool Box Light:
| Parameter | Specification |
| Model | SW-3199 |
| Input Voltage | DC 4.5V |
| Input current | Max. 200mA |
| Power | Max. 0.8W |
| LED specification | SMD2835 |
| LED quantity | 10PCS |
| Luminous flux | 60Lm±10% |
| Static current | <16UA |
| Beam angle | 120° |
| Color Temp | 5000-6000K |
| CRI | Ra>70 |
| Working Temp | -20~+45℃ |
| Storage Temp | -30~+70℃ |
| Lifetime | >30000 hours |
| Working time | 12-20 hours |
| Material | ABS plastic for case |
| Size | 64*72*23mm |
| Length of LED strip | 1.0M |
| Weight | (160g-200g)±10g |
| Package | Blister card package |
| Dimmer | switch to choose on and off |
| Safety certification | CE, Rohs |
Control Box Installation:
a) As shown in the picture below, open the door and place the control box with its front side to the horizontal direction of the door axis, make sure the axis is horizontal direction, find the best position in the door to install considering easier operation in future.
b) Find the best position to install the Lights to make sure the best lighting condition of the strip, and the position should be interfered with by other objects.
c) Clean the installation place carefully to make sure dust free, 3M might peel off if the place is not clean.
d) Velcro installation: remove the backing paper and paste the velcro to the proper place, fix the control box well to the velcro.
e) LED Lights installation: remove the backing paper, paste the Lights under proper force to make sure it is pasted well.
f) Connect the DC connector to the control box and sort out the cable properly to make sure the space is tidy and beautiful.
g) Make sure batteries available and right anode and cathode in the control box before use.
h) Turn the switch to ON position after installation, the light turns on and off automatically when open and close the door, the reaction time is 2-3 seconds.
i) Battery replacement: disconnect the DC cable, remove the square control box, open the battery cover, put batteries in with correct anode and cathode, then chuck the cover.
Delivery Time for Sunway LED Helmet Module:
1. Sample: within 5 days
2. Wholesales Orders: 7-10 days according to various quantities
Caution:
1. Do not look directly at LEDs.
2. Read the manual before installation.
3. Don’t mix standard (carbon or zinc) or rechargeable batteries!
4. Don’t mix old and new batteries
5. Do not incinerate, compact, or disassemble batteries.
6. Don't contact with water!
7. Remove batteries if the light is to be unused for two months or more.