Sunway Products Limited
Sunway Products Limited Honesty, Respect Profession, Innovation, Value
Add to Cart
Tool Box LED Lights With Automatic On / Off Function For Luggage Box , Car Trunk Cargo Area
Features of Sunway SW-3199 Tool Box LED Lights:
1. With 10pcs powerful SMD2835 LEDs for each strip, great for lighting up the entire trunk.
2. Built-in control circuit + AA*3 square battery box + exterior LED strip, 3M velcro at the bottom of square box for easy installation.
3. Turn the switch to OFF position if not use in a long time, turn the button to ON position when use.
4. With Horizontal sensor and Vertical sensor, the light can turns on and off automatically, reaction time is 2-3 seconds.
5. Powered by 3pcs AA batteries, voltage 4.5V, standby life reaches up to more than 2 months, more than 16 hours continuous lighting services.
6. Rear velcro for box attachment.
7. Double-sided tape included for easy installation, just peel and stick onto any flat surface.
8. CE, ROHS listed.
Applications of Sunway Tool Box LED Lights:
The Tool Box LED Lights is perfect for car trunk cargo area or interior lighting, luggage box lighting, you can find everything you need easily.
Specifications of Sunway Tool Box LED Lights:
| Parameter | Specification |
| Model | SW-3199 |
| Power | 0.8W Max. |
| Input current | 200mA Max. |
| Input Voltage | DC 4.5V |
| LED | SMD2835 |
| LED quantity | 10PCS |
| Beam angle | 120° |
| Color Temp | 5000-6000K |
| CRI | Ra>70 |
| Static current | <16UA |
| Luminous flux | 60Lm±10% |
| Working Temp | -20~+45℃ |
| Storage Temp | -30~+70℃ |
| Life time | >30000h |
| Working time | 12-20 hours (deviated from battery quality and capacity) |
| Material | ABS plastic |
| Dimensions | 64*72*23mm |
| Length of LED strip | 1.0M |
| Weight | 160g-200g |
| Package | Blister card package |
| Dimmer | Switch |
| Safety certification | CE, Rohs |
Control Box Installation:
a) As shown in the picture below, open the door and place the control box with its front side to the horizontal direction of the door axis, make sure the axis is horizontal direction, find the best position in the door to install considering easier operation in future.
b) Find the best position to install the Lights to make sure the best lighting condition of the strip, and the position should be interfered with by other objects.
c) Clean the installation place carefully to make sure dust free, 3M might peel off if the place is not clean.
d) Velcro installation: remove the backing paper and paste the velcro to the proper place, fix the control box well to the velcro.
e) LED Lights installation: remove the backing paper, paste the Lights under proper force to make sure it is pasted well.
f) Connect the DC connector to the control box and sort out the cable properly to make sure the space is tidy and beautiful.
g) Make sure batteries available and right anode and cathode in the control box before use.
h) Turn the switch to ON position after installation, the light turns on and off automatically when open and close the door, the reaction time is 2-3 seconds.
i) Battery replacement: disconnect the DC cable, remove the square control box, open the battery cover, put batteries in with correct anode and cathode, then chuck the cover.
Cautions:
1. Read the manual carefully before installation.
2. For indoor use only.
3. Do not look directly at LEDs.
4. Don’t mix old and new batteries
5. Do not incinerate, compact, or disassemble batteries.
6. Recycle old batteries whenever possible. If recycling is unavailable in your area, dispose of old batteries in accordance with local regulations.
Our Service:
1. Your inquiry will be replied within 24 hours.
2. After-sale service: 2 years, any quality problems products within warranty will get maintenance or replacement unconditionally.
3. Shipment mode: International Express, Air freight, Sea Freight, etc.